Monthly Archives: December 2017

Netgear Router Support


NETGEAR R7800 Nighthawk X4S Smart Wi-Fi Gaming Router first to be introduced as 4X4 AC2600 class router. To know more about Fix NETGEAR SUPPORT FOR AC2600 X4S NIGHTHAWK follows the blog with the updated information or connects with our technical experts. The class of router that since its Qualcomm based also has working MU-MIMO right from the beginning. On the top of line Broadcom based R8500 Nighthawk X8 still has only a single beta release that supports MU-MIMO. Very first for NETGEAR and Wi-Fi industry with 5GHz Radio supporting 160 MHz bandwidth modes. Features supported such as remote access, ReadyCLOUD, Open VPN, and Kwitt application support you in managing network remotely, share images stored on your storage device such as phone, or from anywhere. Now control your home network easily with Amazon Alexa and Google Assistant.

Support for following Issues with Netgear AC2600 X4S Nighthawk

  • Support for speedy wireless tech issues
  • Support for wide range of Wi-Fi
  • Support for lowest ping online gaming
  • Support for network sharing issues
  • Support when not able to use easily
  • Support for securing the network
  • Support for any other technical failure

The Technical Benefits of Nighthawk X4S AC2600:


The highly advanced NETGEAR router device designed the name being Nighthawk routers with best-in-class technology for speed, wide range of Wi-Fi, sharing of images, reliability, ease of use and security for your WiFi-enabled devices — smartphones, notebooks, tablets, smart TVs, gaming consoles, Blu-ray® players, and media servers.

Hardware features of Nighthawk X4S

  • One of the most powerful 1.7GHz dual core processor of your NETGEAR router boosts AC2600 WiFi, wired, and WAN-to-LAN network performance is being delivered with the combined speed of an astonishing 2.53Gbps which can be extended up to 1733Mbps on the 5GHz band + 800Mbps on the 2.4 GHz band.
  • Quad-stream architecture with new Wave 2 WiFi improves WiFi range for mobile devices.
  • MU-MIMO technology designed for simultaneous streaming to multiple devices provides major performance improvements with next-generation mobile devices.
  • 80+80/160MHz supports maximum speeds for upcoming mobile devices.
  • 4 high performance external antennas with powerful amplifiers combine with Beamforming+ to ensure the best WiFi coverage and reliability throughout large homes and even backyards, by focusing WiFi directly at connected devices.
  • NETGEAR is having 5 Gigabit Ethernet ports such as 4 LAN and 1 WAN hence offering the multiple fast and wired connections for your home entertainment systems and game consoles as well.
  • 2 SuperSpeed USB 3.0 ports and 1 eSATA port offer high-speed, storage-ready access and transfer of your content significantly faster than USB 2.0.
Related Blog : How to Fix Netgear Router Error Code 651?

Software features of Nighthawk X4S

  • Two technologies namely Application-aware and device-aware Dynamic QoS are optimized with your connection speed for reduced lag and buffering.
  • Security features include VPN support for secure remote access to your home network and Internet when away from home, separate guest network access, and a customized free URL to create a personal FTP server.
  • Ready SHARE Vault is one the free software application, automatically backs up your Windows depending on the PCs on your network to a USB hard drive connected to Nighthawk X4S.
  • The unique NETGEAR genie application, with more than 6 million downloads, is a personal dashboard to make it easy to install, monitor, control and repair your home network.
  • Enhanced Parental Controls are enabling the web filtering and accessibility by family member or devices.
  • NETGEAR My Media helps you to find and play your stored media from anywhere on your network to your DLNA-ready TVs and music system.
  • ReadySHARE USB is the storage access and ReadySHARE is the printing capabilities which enable you to wirelessly access and share a USB hard drive and USB printer via the 2 USB ports.

Online Remote Assistance via Netgear Customer Support Number

Netgear Router Support Number

In case of facing any technical issues with the NETGEAR X4S and not able to fix you can get in touch with us. Dial our +1-800-335-8177 Netgear Router Customer Support Phone Number which is toll-free and available 24*7 hour of day and night. Feel free to communicate via dialing toll-free number, have live chat or drop an email to customer support email id address. With no more delay to your Router technical fault get assistance for fixing the NETGEAR technical issues.

Netgear Router

How to Fix Netgear Router 401 Unauthorized Error?

The Netgear Router 401 Unauthorized Error is typically one of the most common errors which occur when a user tries to access a webpage which is temporarily unable to load until and unless a valid user Id and password is not being used. To Fix Netgear Router 401 Unauthorized Error, you first need to use valid credentials to log into a page. The 401 unauthorized error codes generally appear with one of these error messages, “Authorization required”, or “401 Unauthorized”, or “HTTP Error 401- Unauthorized”.  This error is an HTTP Status Code which is often customized by each websites to display an error inside the Internet Browser window, just as several large websites do.

Fix Netgear Router 401 Unauthorized Error

Advantageous Solutions to Troubleshoot Netgear Router 401 Unauthorized Error:

In this guided walk through, with the help our expert Router Tech Support Team, we have jotted down several possible procedures to troubleshoot this 401 unauthorized error code with immediate effect.

Solution 1: Checking of default errors available in the device

The first and foremost thing you need to do is to check the types URL whether it is properly types or not. Make sure you have not clicked on any other links on multiple points to the defaulted URL.

Related Blog : How to Fix Netgear Router Error Code 651?

Solution 2: Placing a Correct URL

Access the main page of the website and look for a specific link on the “secure access and log in page”. After finding the link, input the proper credentials to login. If you are not using any login credentials, follow the required instruction for logging in.

Solution 3: Reaching out for the proper authorization

If the 401 unauthorized Errors are occurring by mistake, the best thing to do is to reach to the technicians and professionals. You can directly call them or leave a message for them to know the specific reason behind this error message to occur. Sometimes it is possible even after using the proper login credentials, you are witnessing the error, in that time, connect with router tech support team for more help.

Hurry! Dial Router Support Phone Number to avail instantaneous help:

netgear router support

Get in touch with our well qualified and certified tech support team directly by dialing Netgear Router Support Phone Number +1-800-335-8177 to get at desk solution to all your technical glitches associated with router with in shortest time frame.  We are available 24*7 to provide technical support to all customer related queries with comprehensive solution. Hence dial the toll free number now and reach for the experts for easy and convenient assistance.


How To Fix Netgear Router WPS progress Error ?

The problem arises when users are trying to save or is applying changes to the Wireless Settings and then, it fails to process. Thus encountering an error message WPS progress issue. This is basically a kind of pop-up message after users have disabled WPS feature with the help of WPS wizard.It will further indicate about the WPS LED in blinking mode while working with the router when clicked on the “Apply button” in Wireless Setting. Apply below solutions to Fix Netgear Router WPS progress Error explained by Netgear Router Support Number technical team.

Fix Netgear Router WPS progress Error

Solutions tofix WPS progress error in Netgear router

Press and then, hold the WPS button which will be clearly visible on the router for at-least 30 seconds, or until the WPS LED has becomes in steady mode.  As advised, just click the “Apply” button which is located just under the “Wireless Settings”. It is to be noted that the location of the WPS button on your Netgearrouters will differ slightly but definitely will be marked with appropriate symbol.

Related Blog : How to Fix Netgear Router Error Code 651?

A few things to be noted while handling the issue of WPS progress error

  • While pressing the WPS button, the first thing which needs to be kept in mind is that LEDwill blink on and off continuously or may even blink faster. After a while the LED becomes steady as the test was conducted by Netgear Router Support Phone Number
  • The second thing is while saving the Wireless Settings, Wi-Fi and WPS LEDs, they will start blinking continuously in on and off. Later on it will become steady once all of the settings are successfully saved/applied.
  • If user have saved or even applied for the Wireless Settings with SSID broadcast disabled then, a message will appear as “WPS needs an SSID broadcasting process in order to work”. If any changes are made then, the WPS will become inaccessible.

Get in touch with our Netgear Router Customer Care Number for prompt replies

netgear router technical support

Connect to our technical team members at Netgear Router Customer Service Number +1-800-335-8177 to experience immediate solutions for related issues. We are reachable 24 hours to assist users in fixing up complex to complex level issues with proper solutions. Feel free to contact us anytime whenever needed without any hesitation. Services are delivered without any hassle.

Netgear Router

How To Fix IP Address Conflict Error?

The IP address error message executes while users are turning on the computer or is even working on sleep mode when two PC devices on the same LAN network end up conflicting with the same IP address. At this point of time, both of the computers end up of not able to connect to the network resources and performing other network operations.Below are solutions to Fix IP Address Conflict Error .

Fix IP Address Conflict Error

Solutions To Fix IP Address Conflict Error

Solution 1: Try our renewing and re-configuring the IP addresses

Step 1: Renew the IP Address

The first thing is to release and then, renew the IP address of the computer with the help of command prompt. Tap the “Start” button and type in the “CMD” command. Now, at the command prompt, type the below command to release theIP address as: ipconfig /release. Depending on a wide number of adapters installed in the machine, a wide number of results will appear. Now, run the command to renew the IP address which is easily available from the DHCP server and is typed as ipconfig /renew. Try to see results for IP address listed just next to the IPv4 Address.

Step 2: Reconfigure the static IP address

If users are working with the static IP address, consider changing it to other static IP address. Your current IP address will start conflicting with the set of IP addresses which the DHCP server is executing. The IP address can also be acquired directly from the DHCP server or via manual mode by entering an IP address. To perform this step, tap the “Control Panel’, go to “icons view” and then click the “Network and Sharing Center” icon. Click the “Change adapter settings’ and then, right-click the network adapter which is currently being used for the Internet connection. Click to select the “Properties’ icon. Now, carefully choose a proper IP address from a DHCP server as suggested by Netgear Router Support professionals. Enter the static IP address. Unless you are sure about what is the actual IP address, just obtain it automatically from a DHCP server.

Solution 2: Restarting the wireless router

This is another solution where users need to restart the wireless router for performing a quick reboot process. After restarting it, start the PC device too. Well, in rare instances, the actual DHCP server can further lead to malfunction mode which is assignedto more than one computer the same IP address. So, here, it is always better to try and update the firmware on the router. Most of the people don’t ever update their router firmware which is the ultimate cause of the problem, so issues like this can crop up easily.

Related Blog : How to Fix Netgear Router Error Code 651?

I hope these solutions will help you out in fixing up the IP address conflict issue. But we recommend users to get in touch with our teamfor resolving such problems with right solution.

Connect to our expert team at Netgear Router Customer Support Number for instant replies

netgear router technical supportGet connected to our technical team at Netgear Router Customer Service Number where technicians are ready to assist users in resolving issues related to Netgear with right choice of solution. We are available all day to help resolve issues as and when needed requested by users.For any query, feel free to call us anytime and we are right there at your desk with appropriate solution.


How to Fix Netgear Router Error Code 651?

Often, it’s really frustrating to Fix Netgear Router Error Code 651, for users at the right time. Error Code 651 certainly ranks as one of the more common issues of the Netgear Router Error Codes. Many numbers of users come across this type of error when they try to establish an internet connection using PPPoE connections. It’s really important to solve Error Code 651 before anything wrong happens with your Netgear Router. So, if you are facing the same Error Code 651: The modem (or the other connecting device) has reported an error and usually the message will be titled as “Connection failed with error 651”. Then understanding the reasons for the Error Code 651 is required for you, and what steps you should take to resolve the issue can have you back on track or accessing the Internet connection service with your newly Netgear Router is crucial for you. This error occurs due to various reasons such as when the Raspppoe.sys file has be saved in the wrong location, Registry errors, IP address conflict, and so on.  Well, here the below mention blog solutions will guide you in the appropriate way to solve the issue easily, or you can connect to Netgear Router Support Number for resolving this issue with easy online help by proficient professionals.

Fix Netgear Router Error Code 651

Solutions to Fix Netgear Router Error Code 651:-

Solution 1:-Reconnect Your Router or Other Connecting Device

This is the most basic troubleshooting step, and everyone can simply solve this error by just reconnecting the internet connecting device. So if you are using a router then simply turn off your router and after 5 minutes, turn it on or if you are using LAN connection then unplug the wire and plug it back.

Solution 2:-Reset TCP/IP On Your PC

You should try resetting the Windows networking stack can solve error 651 and luckily windows 8/7/Vista comes with a built-in tool you can use.

Follow the below steps to do this thing:-

  • First, launch a command prompt with the administrative right.
  • Then copy the command “netsh int ip reset reset.log ”.
  • Then press “Enter” key.
  • Restart your computer.

After this step, sure your issue is fixed. If not, then go to the next method.

Solution 3:- Recreating Dial-Up Connection

Might be your internet connecting device get hanged during the connection. So the best solution to fix the issue is to recreate your dial-up connection. Then simply right click your “Dial-Up” or “Broad band connection” and then choose “create a copy” and then delete your existing connection.

Follow these steps to do this task:-

  • Open “Network & Sharing Center” and click on “Change Adapter Setting”.
  • Next, right click your broadband or dial-up connection and select “Create Copy” option.
  • Next, it will create a copy of your existing connection.
  • Now simply delete your old connection and redial the new connection.
Related Blog: How to Fix Netgear Router Overheating Error

Solution 4:- Boot the Computer in Safe mode. Disable Antivirus software.

It is suggested by the Netgear Router tech support team to boot the computer in safe mode with the networking and check if you are able to connect to the internet without any issues, safe mode starts Windows with a limited set of files and drivers. Startup programs don’t run in safe mode, and only the basic drivers needed to start Windows are installed.

Follow the steps to boot the computer in safe mode with networking:-

  • Restart your computer if it is powered on.
  • Then hit “F8” key after your computer initially powers on.
  • Once you see the “Advanced Boot Options” menu you can stop tapping.
  • Use the up/down arrow keys to highlight your selection.
  • Choose “Safe Mode” with Networking and press “Enter” key.
  • Wait for some time, while drivers loading.
  • Then you will see a Welcome Screen.
  • Next, login to your computer using an account with “Administrator privileges”.

If this step fails then try to Disabling Firewall/Security Software if any.

Solution 5:- Perform Clean Boot

  • Go to start and search for “msconfig.exe”.
  • Click it to launch windows configuration.
  • Now under general tab click on “Selective startup: and select Load startup items.
  • Now switch to “Services” tab and check “Hide all Microsoft services”.
  • After that, you just need to click on “Disable” all to disable all other services.
  • Now simply just restart your PC to perform a clean boot.

Hopefully, your Netgear Router Error Code 651 solve.

In case, if this Error is still appears, then you should contact the Netgear customer service number to take specialist help & guidance.

netgear router technical support

Dial Netgear Customer Support Number To Receive Fast Resolutions & Help:-

You can call at Netgear Customer Care Support Phone Number +1-800-335-8177 anytime from anywhere, which is available 24x/365 days for your help. Through number you can connect with the team of well-brilliant and experienced Netgear Customer support team, who will give you the excellent guidance to troubleshoot this issue in an easy manner. In addition, you can avail the hasty support & services to fix other kinds of Netgear technical issues or errors. Hence, call now toll-free number for further Netgear related queries.